MilDeWat – Breakthrough Mild Dewatering Technologies
This project will enhance the implementation of mild (energy extensive) dewatering technologies to contribute to industry's energy reduction goals.
Completed
DISCO – Downstream ISolation of high-value COmponents
The Downstream ISolation of high-value Components (DISCO) aims to lower the material use and increase the energy-efficiency.
Completed
SiC – Silicon Carbide membranes for innovative oil-in-water separations
This project investigates the behavior of silicon carbide membranes in pilot trials. These determine fouling, cleaning options, cleaning frequency and the consequences for the long term performance and economics. Test...
Completed
Measurements 4 Management
Measurement 4 Management (M4M) focused on applying data-driven decision-making in the process industry, by combining artificial intelligence (AI) with the domain knowledge of process engineers.
Completed
ERGO – Energy Reduction by Condition-based Monitoring
Unlocking energy efficiency and fault detection with electrical signal analysis Electric motors and rotating equipment—such as pumps, fans, compressors, and conveyors—consume over 40% of global electricity. However, nearly one-third of...
Advanced Carbohydrates Biorefinery: From Waste to Value
Every year, large amounts of tertiary cellulose end up being incinerated. This results in unnecessary CO₂ emissions and loss of valuable material. The ACB project develops an alternative route: one...
Completed
HF2N – High Flux 2D Nanosheet membranes
High Flux 2D Nanosheet membranes to demonstrate and validate the high potential of a new class of inorganic high flux 2D Nanosheet membranes on a practical scale
Completed
CMF – Controlling Multiphase Flow
This Industrial Partnership Programme aims at understanding the rheology of complex emulsions and their stability under flow. While there is much empirical knowledge about emulsion rheology and stability, the microscopic...
Completed
PRIDES: Deep Eutectic Solvents in the Paper Industry
The European project cluster aims to approach 80% CO2 emission reduction in the lignocellulose processing chain.
Completed
Methanol, the LOGIC Choice!
The LOGIC project scales-up the Liquid-Out Gas-In Concept reactor for methanol synthesis from CO2 and sustainable hydrogen.
Completed
COLFILM – Collapsing Films in Emulsions
In this project computer simulations are used to reveal the impact of a crucial underlying phenomenon: little waves on the surface of droplets that can suddenly grow and thus accelerate...
Completed
EAMS – Energy efficient Affinity-driven Molecular Separation
The aim of the EAMS project is to: Application New or improved affinity separation options for selected cases: extractive distillation and (reactive) liquid-liquid extraction.
SEUSS – Saving Energy by Upcycling of Side Streams
The shift to plant‑based proteins demands smarter, cleaner processing. SEUSS develops new ways to reduce energy use and recover valuable resources from side streams. In Short Energy-related challenges The protein...
FlexPower: Accelerating industrial electrification for a CO2-neutral future
Industrial electrification is key to achieving the Netherlands’ goal of reducing CO2 emissions by 60% by 2030 and becoming climate-neutral by 2050. The FlexPower project focuses on flexible and efficient...
PoSiMem – Periodic organosilica nanofiltration membranes
This project aims to develop robust, reproducible and easy to scale-up approaches for the production of novel nanofiltration (NF) membranes.
Completed
ReCYCLE – Electrical bike with durable circular plastic parts
ReCYCLE is a cutting-edge project that combines electric bikes with durable circular plastic parts, pushing the boundaries of innovation in sustainability.
AutoPlastic: Shaping the Future of Automotive and Plastic Recycling
As the automotive industry faces new recycling legislation, the AutoPlastic project leads the way in boosting car plastic recycling. It helps the Dutch automotive sector stay ahead by developing solutions...
Completed
EEMS – Energy Efficient Milky Sprays
Spray drying is a very energy intensive process. EEMS is about energy efficient drying which can lead to 20% energy reduction.
Completed
HyScaling – Making better electrolyzers in a better way
HyScaling aims to scale electrolysis capacity up to 5GW by 2030 so the Netherlands can play a key role in the global green hydrogen economy.
Circular Aromatics – Turning Waste into High-Value Circular Plastics
As the world moves toward net-zero carbon goals, the demand for sustainable materials is rapidly increasing. Plastics, essential in countless applications, must evolve to meet the demands of a circular,...
TEXPOWER – Textile Polycotton Waste Evaluation & Recycling
The TEXPOWER project aims to enable a transparent, circular polycotton textile value chain for a sustainable industry in the Netherlands.
Completed
Engender: Compact Energy Efficient Dryer
Engender works on an energy efficient drying method of foods. Expected energy savings are estimated up to 30%.
Completed
Steam and condensate quality
This project focuses on requiering better insights into the distribution and behaviour of conditioning chemicals that is used in their steam-water cycles and condensate polishing. Process industries strive for more...
Completed
ISRO – Implementation of Solvent Recovery in edible Oil
The ISRO project delivers a proof-of-principle of organic solvent nanofiltration-based solvent recovery for two cases. The first case is an integration of OSN with the current distillation process at IOI...