Completed
PRIDES: Deep Eutectic Solvents in the Paper Industry
The European project cluster aims to approach 80% CO2 emission reduction in the lignocellulose processing chain.
Completed
RFS2 – Radio Frequent Sterilization 2
The project Radio Frequent Sterizilation 2 (RFS2) is focused on the development of RF in-pack sterilization of foods. The project is a continuation of the JIP-project Radio Frequent Sterilization (RFS)...
Aramazing
Aramids hold untapped potential in the journey towards sustainability. We can transform these once-disposed materials into a circular value chain, reducing waste, and striving for CO2 neutrality.
Completed
Steam and condensate quality
This project focuses on requiering better insights into the distribution and behaviour of conditioning chemicals that is used in their steam-water cycles and condensate polishing. Process industries strive for more...
Measurements 4 Management
The aim of Measurement for Management (M4M) is to develop operational predictive technologies that (1) are transparent and include all available process information, (2) provide predictions of Key Performance Indicators...
Cell-U-Value
Cell-U-Value developed and utilized the capabilities of tertiary cellulose as a feedstock for biobased and sustainable chemicals to its fullest potential.
Completed
ZERO BRINE
The ZERO BRINE project combines technologies to recover products of high quality and sufficient purity from brine.
e-Missi0n MOOI
e-Missi0n aims to develop 2 technological routes for the emission free production of low-carbon olefins.
ENCORE – nExt geNeration COmpRession hEat pump
This project demonstrates the enhancement of compression heat pump performance by using a pilot scale test unit.
New
Circular Aromatics – Turning Waste into High-Value Circular Plastics
As the world moves toward net-zero carbon goals, the demand for sustainable materials is rapidly increasing. Plastics, essential in countless applications, must evolve to meet the demands of a circular,...
Completed
RMZD – Radial Multi-Zone Drying
The Radial Multi-zone Dryer (RMD) project investigates new type of spray dryer for premium product properties and low specific energy consumption.
TEXPOWER – Textile Polycotton Waste Evaluation & Recycling
The TEXPOWER project aims to enable a transparent, circular polycotton textile value chain for a sustainable industry in the Netherlands.
Completed
Methanol, the LOGIC Choice!
The LOGIC project scales-up the Liquid-Out Gas-In Concept reactor for methanol synthesis from CO2 and sustainable hydrogen.
Completed
DISCO – Downstream ISolation of high-value COmponents
The Downstream ISolation of high-value Components (DISCO) aims to lower the material use and increase the energy-efficiency.
MilDeWat – Breakthrough Mild Dewatering Technologies
This project will enhance the implementation of mild (energy extensive) dewatering technologies to contribute to industry's energy reduction goals.
Flexible Efficient Electrification of Industrial Heat Cases
This project will develop innovative process designs solving the efficient flexible electrification challenge.
Completed
TENMIP – Testing and evaluation of nanofiltration membranes in industrial processes
Make very tight, low swelling NF or RO membranes for organic solvents, test them in process mixtures as present in industry and demonstrate / evaluate their economic feasibility on small...
New
AutoPlastic: Shaping the Future of Automotive and Plastic Recycling
As the automotive industry faces new recycling legislation, the AutoPlastic project leads the way in boosting car plastic recycling. It helps the Dutch automotive sector stay ahead by developing solutions...
Completed
INSPEC – Integrating sensor based process monitoring and advanced process control
INSPEC quantitatively integrates information from state-of-the-art Process Analytical Technology, process measurements and dynamic process models (data driven or physics-based) into Advanced Process Control. This will induce a step-change with respect to...
LESSON – Oil free compressor for ammonia based high temperature heat pumps
Wet compression allows for close to isothermal conditions during compression resulting in higher compression isentropic efficiencies. It further prevents operation in the superheating zone of the working fluids of heat...
New
Advanced Carbohydrates Biorefinery: From Waste to Value
Every year, large amounts of tertiary cellulose end up being incinerated. This results in unnecessary CO₂ emissions and loss of valuable material. The ACB project develops an alternative route: one...
Completed
ECWRTI – Electrocoagulation for Water Recycling in Textile Industry
The ECWRTI project is about closing the waterloop in the textile industry.
Completed
SiC – Silicon Carbide membranes for innovative oil-in-water separations
This project investigates the behavior of silicon carbide membranes in pilot trials. These determine fouling, cleaning options, cleaning frequency and the consequences for the long term performance and economics. Test...
Completed
StAgglop: Reducing energy use and material loss by better control of agglomeration during spray drying
Project stAgglop aims to improve agglomeration control to contribute to the reduction of emissions for industrial drying systems.