Completed
Steam and condensate quality
This project focuses on requiering better insights into the distribution and behaviour of conditioning chemicals that is used in their steam-water cycles and condensate polishing. Process industries strive for more...
SEUSS – Saving Energy by Upcycling of Side Streams
The shift to plant‑based proteins demands smarter, cleaner processing. SEUSS develops new ways to reduce energy use and recover valuable resources from side streams. In Short Energy-related challenges The protein...
Completed
StAgglop: Reducing energy use and material loss by better control of agglomeration during spray drying
Project stAgglop aims to improve agglomeration control to contribute to the reduction of emissions for industrial drying systems.
Completed
RMZD – Radial Multi-Zone Drying
The Radial Multi-zone Dryer (RMD) project investigates new type of spray dryer for premium product properties and low specific energy consumption.
Completed
Carbon Transition Model
The Carbon Transition Model is a simulation model to explore ways to reduce emissions and increase carbon circularity.
Completed
E3C – Electrons to Close the Carbon Cycle
Development and evaluation of tubular and flat porous electrodes for the electrochemical conversion of gasses at ambient temperature. Motivation Renewable electricity (RE) generation is currently growing at a rapid pace....
Completed
Methanol, the LOGIC Choice!
The LOGIC project scales-up the Liquid-Out Gas-In Concept reactor for methanol synthesis from CO2 and sustainable hydrogen.
Completed
PINcHED – Process INtegrated HEat pump Drying
This project creates greenfield conceptual design packages for contact and convective drying of a full scale. In addition, it focuses on establishing a fully heat pump integrated drying process, including...
FUSE – FUll ScalE Industrial Heat Pump Using Natural Refrigerants
Supporting the development and success of an industrial heat pump market through the develeopment of a standardized, modular, flexible compression heat pump technology. Incentive High temperature industrial heat pumps are...
TREPS – Trace Removal Using Electrically Powered Separations
In a circular economy, traces need to be removed to keep the loop clean. TREPS deals with trace removal using electricity.
Completed
e-Missi0n MOOI
e-Missi0n developed two technological routes for the emission free production of low-carbon olefins.
Electrified – Electrically driven non-thermal dewatering of biomass
The aim of the Electrified project is to establish new technologies for future key technologies for biomass dewatering.
Completed
Sussic – Sustainable treatment of industrial streams
In the Sussic project, atomic layer deposition (ALD) will be used for the development of SiC NF membranes, allowing treatment of challenging industrial streams.
Completed
ZERO BRINE
The ZERO BRINE project combines technologies to recover products of high quality and sufficient purity from brine.
Completed
GreenWedge
The GreenWedge project helps SMEs actively market their sustainable technology.
Completed
MilDeWat – Breakthrough Mild Dewatering Technologies
This project will enhance the implementation of mild (energy extensive) dewatering technologies to contribute to industry's energy reduction goals.
Completed
INSPEC – Integrating sensor based process monitoring and advanced process control
INSPEC quantitatively integrates information from state-of-the-art Process Analytical Technology, process measurements and dynamic process models (data driven or physics-based) into Advanced Process Control. This will induce a step-change with respect to...
Completed
MPPS – Multipurpose Plastic Sorting
This project focuses on radically innovating the way we address mechanical sorting of plastic waste.
Completed
Preciouspitation
Obtaining process water out of rain from own roof with high energy saving potential compared to current processes. Motivation and Scope Rainwater is already chemically very pure. Only some evaporated...
Ammonia to Power
The Ammonia to Power project explores the techno-economic potential of ammonia powered electricity generation.
Completed
CirBind – Circular binder applications
ISPT's Cirbind project scales up the Plantics-GX bioresin production process to generate safe, strong & high impact circular binder applications.
Completed
COMPACT – Pulsed Compression II
The goal of this project was to produce ethylene from methane using pulsed compression technology and to determine the feasibility for industrial applications.
Completed
IMPACCT – Improved process performance by process intensification in centrifugal contactors
Centrifugal contactors, such as RPBs, could provide significant improvement of separation processes in the chemical industry. This technology seems potentially suitable for replacing or debottlenecking current unit operations which suffer...
Completed
SUPP – Steel Slag Upgrading and PCC Production
The aim of the SUPP project is to create one combined and integrated robust batch process in order to stabilize and upgrade steel slag and neutralize hydrochloric acid. In addition, it...