Completed
INSPEC – Integrating sensor based process monitoring and advanced process control
INSPEC quantitatively integrates information from state-of-the-art Process Analytical Technology, process measurements and dynamic process models (data driven or physics-based) into Advanced Process Control. This will induce a step-change with respect to...
Completed
RFS2 – Radio Frequent Sterilization 2
The project Radio Frequent Sterizilation 2 (RFS2) is focused on the development of RF in-pack sterilization of foods. The project is a continuation of the JIP-project Radio Frequent Sterilization (RFS)...
Completed
EEMS – Energy Efficient Milky Sprays
Spray drying is a very energy intensive process. EEMS is about energy efficient drying which can lead to 20% energy reduction.
Completed
PRIDES: Deep Eutectic Solvents in the Paper Industry
The European project cluster aims to approach 80% CO2 emission reduction in the lignocellulose processing chain.
New
Cascade Recyling of Plastic Film (CaRP)
The CaRP project will find and show realistic cascade recycling routes for packaging film waste to minimise the amount of plastic film waste that is incinerated and to maximise the...
Completed
LEMPLAR – Losses & Emissions in Plastic Recycling
The plastic recycling process today has losses and emissions, such as microplastics, inks and incorrectly sorted plastics. This prevents us of closing the plastic cycle.
Completed
FreezeCon – Freeze Concentration
Saving energy, improving product quality with freeze concentration as economically feasible bulk dewatering technology. Background Several technologies are available for liquid concentration in the food industry, the most common being...
Completed
Plasma Conversions
Industrial ammonia production is energy intensive and has a huge footprint. A plasma integrated water electrolyser provides an ecologically clean alternative process to Haber-Bosch.
Completed
RMZD – Radial Multi-Zone Drying
The Radial Multi-zone Dryer (RMD) project investigates new type of spray dryer for premium product properties and low specific energy consumption.
Completed
HOPy – Headstart on pyrolysis
HOPy wants to find a solution that mitigates the environmental impact of plastic waste and taps into its potential as a resource for creating new materials.
Completed
Biorefinery Program
Biorefinery enables the production of healthy ingredients and the recovery of valuable components (i.e. proteins) out of process streams.
Completed
HyChain – Energy Carriers and Hydrogen Supply Chain
The HyChain project is focused on a strategic understanding of the drivers behind global emergence of future renewable hydrogen value chains.
SUNSOLr: Electrification of Chemical Conversions
The SUNSOLr project is dedicated to developing technologies for the direct electrification of chemical conversions, focusing on CO2 and H2O/H2 to produce chemicals like CO, CH4, olefins, and methanol.
DRAGONS Egg – Increasing energy efficiency by steering DRoplet AGglomeratiON in Spray dryers
The DRAGONS Egg-project aims to unravel the dynamics of atomisation behaviour in drying and agglomeration of the droplet.
Completed
CALMEM – Ceramic atomic layer deposited Nanofiltration membranes for separation of challenging industrial streams
Calmem concerns nano manufactured ceramic membranes that can supersede distillation columns for energy saving in the Netherlands.
Completed
Carbon Transition Model
The Carbon Transition Model is a simulation model to explore ways to reduce emissions and increase carbon circularity.
FLEXSTEAM – Development of heat storage for industrial steam
The FLEXSTEAM project aims to improve the way we can store and re-use thermal energy by using so called ‘Phase Changing Materials’ (PCMs). To achieve a fully circular economy we...
Completed
Provides
The Provides initiative aims to make the paper industry more sustainable by developing Deep Eutectic Solvents (DES).
Circular Aromatics – Turning Waste into High-Value Circular Plastics
As the world moves toward net-zero carbon goals, the demand for sustainable materials is rapidly increasing. Plastics, essential in countless applications, must evolve to meet the demands of a circular,...
ENCORE – nExt geNeration COmpRession hEat pump
This project demonstrates the enhancement of compression heat pump performance by using a pilot scale test unit.
BEAP – Bundled Early Adaptor Project
BEAP helps SMEs make contact with industries, localize and develop their technologies to suite the specific needs of Dutch industrial partners.
CareFree Models for real-time decision-making
Carefree Models puts process model maintenance, adaptation and transfer into an integrated, automated, and predictive framework that quantifies and reduces the overall resources required to sustain process predictivity and resulting...
Completed
SAAI – Social Acceptance of AI in Industry
The SAAI project focuses on accelerating the implementation of Artificial Intelligence (AI) in industry, leading to an energy use reduction of 5-40%, an increased competitiveness of industry, and increased economic...
Completed
ECWRTI – Electrocoagulation for Water Recycling in Textile Industry
The ECWRTI project is about closing the waterloop in the textile industry.