Completed
ECWRTI – Electrocoagulation for Water Recycling in Textile Industry
The ECWRTI project is about closing the waterloop in the textile industry.
PoSiMem – Periodic organosilica nanofiltration membranes
This project aims to develop robust, reproducible and easy to scale-up approaches for the production of novel nanofiltration (NF) membranes.
The Heat Is On
The Heat is On aims to make processes for dewatering, drying and heat integration more efficient.
Amazing – Additive Manufacturing for Zero-Emission Innovative Green Chemistry
Amazing is about replacing large-scale high-temperature cracking processes with electrically driven thermocatalytic dehydrogenation.
e-Missi0n MOOI
e-Missi0n aims to develop 2 technological routes for the emission free production of low-carbon olefins.
ERGO – Energy Reduction by Condition-based Monitoring
Using SAM4 to detect energy-inefficiencies and realize energy reduction. Semiotic Labs’ SAM4 provides a novel and unique approach to condition monitoring for critical AC motors and rotating equipment such as...
Completed
WeCare – We Create Awareness & Reduce Energy
The WeCARE project demonstrated the possibilities of Artificial Intelligence technology of EnergQ at a selected number of end users. EnerGQ’s self-learning energy management technology unveiled the excessive energy consumption and with that...
New
Flexible Efficient Electrification of Industrial Heat Cases
This project will develop innovative process designs solving the efficient flexible electrification challenge.
SUPP – Steel Slag Upgrading and PCC Production
The aim of the SUPP project is to create one combined and integrated robust batch process in order to stabilize and upgrade steel slag and neutralize hydrochloric acid. In addition, it...
Completed
PTTP – Process Technology Talent Program
PTTP was a talent program for promising HBO students who aim to drive sustainability in the process technology.
Completed
GreenWedge
The GreenWedge project helps SMEs actively market their sustainable technology.
StAgglop: Reducing energy use and material loss by better control of agglomeration during spray drying
Project stAgglop aims to improve agglomeration control to contribute to the reduction of emissions for industrial drying systems.
ELSA – Electrically Switchable Affinity Separation Processes
Exploring the advantages of Electrically Switchable Adsorption (ELSA) membranes in the industrial separation process.
MPPS – Multipurpose Plastic Sorting
This project focuses on radically innovating the way we address mechanical sorting of plastic waste.
Engender: Compact Energy Efficient Dryer
Engender works on an energy efficient drying method of foods. Expected energy savings are estimated up to 30%.
Completed
Preciouspitation
Obtaining process water out of rain from own roof with high energy saving potential compared to current processes. Motivation and Scope Rainwater is already chemically very pure. Only some evaporated...
DRAGONS Egg – Increasing energy efficiency by steering DRoplet AGglomeratiON in Spray dryers
The DRAGONS Egg-project aims to unravel the dynamics of atomisation behaviour in drying and agglomeration of the droplet.
Completed
INSPEC – Integrating sensor based process monitoring and advanced process control
INSPEC quantitatively integrates information from state-of-the-art Process Analytical Technology, process measurements and dynamic process models (data driven or physics-based) into Advanced Process Control. This will induce a step-change with respect to...
ENCORE – nExt geNeration COmpRession hEat pump
This project demonstrates the enhancement of compression heat pump performance by using a pilot scale test unit.
Completed
COLFILM – Collapsing Films in Emulsions
In this project computer simulations are used to reveal the impact of a crucial underlying phenomenon: little waves on the surface of droplets that can suddenly grow and thus accelerate...
Completed
IMPACCT – Improved process performance by process intensification in centrifugal contactors
Centrifugal contactors, such as RPBs, could provide significant improvement of separation processes in the chemical industry. This technology seems potentially suitable for replacing or debottlenecking current unit operations which suffer...
Completed
Carbon Transition Model
The Carbon Transition Model is a simulation model to explore ways to reduce emissions and increase carbon circularity.
Demonstration Polymer Heat Exchanger
The goal of this project is to demonstrate the innovative technologies as developed by HeatMatrix in the industrial process in the BioMCN factories. On the one hand this would result...
ZERO BRINE
The ZERO BRINE project combines technologies to recover products of high quality and sufficient purity from brine.